2025 John Deere Mid-Mount Mower Decks 60D

Fits 1023E/1025R/2025R Tractors - Install your mower deck without leaving the tractor seat - drive over the top of the mower as the mower deck automatically connects to the tractor and the PTO shaft automatically hooks up.
MoreLess

2025 John Deere Mid-Mount Mower Decks 60D

AutoConnect™ Mid-Mount Mower Deck

Easy drive-over mower deck installation

Compatible with rear 3-point hitch attachments, backhoes, and loaders so you can keep these implements attached while mowing

Simple, one pin, height-of-cut adjustment

Mid-power take-off (PTO) driven

Features may include:

Installation and removalMid-mower lift system (3120 - 3720 and 3R Tractors)

The hydraulic independent lift system-of-cut system allows the mower to be raised and lowered independently of the rear implements. It can use either the dual selective control valve (SCV) (loader joystick).

The forward lift link is installed on the deck. It is spring loaded, allowing the link to connect automatically to front hangers (installed on tractor).

The PTO-drive shaft design allows the shaft to automatically adjust as the female end of the PTO coupler engage with the male end of the gearbox coupler. The male end coupler has tapered guides to ensure engagement of both ends.

Mid-mower lift system (Model year 2017 and newer 2032R and 2038R Tractors)

The 2032R and 2038R tractors feature a newly designed, CommandCut™ mower deck lift system, which allows quick and accurate adjustments of the mower deck with the turn of a dial and the bump of a lever. Control callouts make operation simple and repeatable. The height of cut setting dial and raise/lower lever are conveniently located on the right-hand console and easily accessible by the operator. Some of the key benefits of this system are:

Installing CommandCut™ only requires a simple calibration after installation. It is a true “plug-and-play” system as no controller programming is required.

Inhibits PTO operation when mower deck is in the install position to prevent PTO driveling and mower deck blade damage

Eliminates the need for hydraulic power and components, thus dedicating all hydraulic capacity to other implements or tract functions

Fewer hydraulic components means fewer hydraulic leaks, especially when working on sensitive turf

Precise height of cut with no drift or leakdown

Compatible with front/rear implements

AutoConnect™ Decks are compatible with rear 3-point hitch attachments, backhoes, loaders, and a front hitch. The operator can keep these extra implements attached to the tractor while mowing, if desired.

3R and 3000 TWENTY Series Tractors are equipped with a dual mid SCV as standard equipment. The mid-mower hydraulic lift can use the dual SCV (loader joystick), to lift the mower deck, giving maximum flexibility.

NOTE: For 3R Series Tractors, additional brackets are required for use with a front 3-point hitch and an AutoConnect Mid-Mount Mower in order to leave the front 3-point hitch on with a mid-mower deck. See LVB25820 front 3-point hitch/mid-mount brackets.

For use with a front 3-point hitch and an old 154.4-cm (60-in.) or 182.9-cm (72-in.) 7-Iron™ Mid-Mount Mower on 3033R-3046R and 3120-3720 Tractors, LVB24810 front 3-point hitch/mid-mount mower draft arms are required.

  • 2025
  • John Deere
  • Mid-Mount Mower Decks
  • 60D
  • Implement / Attachment
  • Blade Tip Speed (at 2600 rpm): 4,858.5 m/min (15,940 fpm)
  • Deck Thickness: 7 gauge (4.554 mm / 0.1793 in.) | Thickness: 0.63 cm (0.25 in.) | Gauge Wheel Size: Front/Rear: 12.7 cm (5 in.)
  • 2.54 cm (1 in.)
  • (Deflector Up/Down):159 cm (62.5 in.) / 185 cm (73 in.)
  • 155 cm (60.9 in.)
  • Blade: 53.5 cm (21.1 in.)
  • Cutting: 2.5 to 13.9 cm (1 to 5.5 in.)
  • 147 kg (324 lb)
  • Number of Blades: Three
  • 60
  • Stamped
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $5,413.00
  • In Stock
  • New
  • In Stock
  • 2025
  • John Deere
  • Mid-Mount Mower Decks 60D
  • Available
  • Cutting: 2.5 to 13.9 cm (1 to 5.5 in.)
  • 60
  • Stamped
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.