Selling Price -
$24,444.00
2024 John Deere X700 Signature Series X758
Features may include:
Engine is 3-cylinder diesel for fuel economy and durability- A liquid-cooled, 3-cylinder diesel engine provides exceptional power, performance, fuel economy, and durability to handle commercial-use applications:
- Large displacement provides exceptional torque
- Cast-iron block improves noise absorption
- Quality features include cast-iron cylinder liners, overhead valves, full-pressure lubrication, and replaceable oil filter
- Solenoid-shift starter ensures easy starts, even in cold weather
- High-energy glow plugs ensure quick starts in cold weather; an automatic sensing system tells the operator when the engine is ready to start
- Mechanical fuel bleed eliminates the need for tools and fuel leaking onto the ground when bleeding the fuel system:
- Simply pump the fuel pump that is located on the side of the engine
- Electric fuel shutoff eliminates the need for a separate kill switch
- Indirect injection with pre-combustion chambers provide smooth, quiet operation
- Engine-mounted 40-amp alternator supplies regulated charge to the battery for fast recharge:
- Also provides plenty of power for 12-volt-powered attachments and accessories
- Low exhaust emissions are certified to meet U.S. Environmental Protection Agency (EPA) and state of California standards for cleaner air:
- Overhead valve design for efficient airflow
- Swirl chamber combustion design for efficient combustion
- Liquid cooled for more consistent operating temperatures
- Closed crankcase ventilation recirculates and burns crankcase hydrocarbons
- Engine intake air is drawn in through screened panels at the base of the pedestal and on the right and left sides of the tractor:
- Cleanest and coolest area of the tractor
- Pre-cleans the air to keep large chaff and debris from entering the radiator or air cleaner
- Easy to clean and service so engine operates at optimum temperature
- The diesel engine uses a heavy-duty cyclonic canister-type replaceable air filter:
- Completely sealed for effective cleaning
- Cyclone action that is designed to eject 90 percent to 95 percent of the dirt before it reaches the paper element
- Secondary safety element that provides additional filtering
- Total effective filter area of 512 sq in. (3303 sq cm)
- An air filter restriction indicator is standard equipment:
- Indicator light on the dash alerts the operator when the air filter is dirty and needs to be replaced
- With a visual check, air filter daily service is simplified
- Indicator extends the engine life by eliminating inadvertent dirt entry into the engine from over-servicing of the air filter
- A large, 5.2-U.S. gal. (19.7-L) capacity fuel tank holds enough fuel for extended operation between refills:
- Fuel-fill location is on the left fender for easy access, increased safety, fewer spills, and convenience during filling.
- A fuel filter/separator with replaceable element includes a shutoff valve and is conveniently located on the front of the engine.
- 2024
- John Deere
- X700 Signature Series
- X758
- Riding
- Model: 3TNM74F
- 17.9 kW (24 hp)
- 993 cc (60.6 cu in.)
- Diesel, overhead valve, full-pressure lube, oil filter
- Three, cast-iron liners
- Mechanical
- method: Liquid
- Paper dry-type with primary and secondary elements
- Solenoid shift
- delivery: In-line indirect injection
- Diesel | tank location: Rear
- Gauge on dash
- One lever
- Hydraulic power | Tilt wheel: six position
- Mower: Hydraulic clutch, shaft | Mower attachability: Shaft or AutoConnect
- Internal wet disc
- 26x12-12 HDAP
- 18x8.5-10 HDAP
- Mower: 48A, four and center front roller
- 12 V / 500 CCA
- Engine-mounted alternator, regulated, 40 amp
- Forward: 0-13.7 km/h (0-8.5 mph) | Reverse: 0-9.7 km/h (0-6 mph)
- outlets: Four
- Welded heavy-duty
- Receiver: front
- Headlights: Two standard, halogen, 37 W | Taillights or reflector: Taillights
- Backup protection: Reverse Implement Option (RIO)
- Fuel fill opening On left fender: 7.6 cm (3 in.) | Steering wheel: 35.6 cm (14 in.) | Fore-aft adjustment: 14-position, 17.8 cm (7 in.) | Mower deck material - 48A: 10 gauge 3.4 mm (0.135 in.) / 54 HC and 60 HC: 9 gauge 3.8 mm (0.150 in.) | Mower wheels rotate: 90 degrees for easy mower removal (48A), (54 HC, 60 HC)
- Accel Deep™ mower deck: 122 cm (48 in.) / High capacity mower deck: 137, 152 cm (54, 60 in.)
- 63.5 cm (25 in.) | Uncut circle - 54 HC: 81.3 cm (32 in.) / 60 HC: 71.1 cm (28 in.)
- back: 53.3 cm (21 in.)
- Mower cut: 2.5-13.3 cm (1-5.25 in.) | Cut increments: 0.64 cm (0.25 in.) | 1384 mm (54.5 in.)
- 1905 mm (75 in.)
- 1415 mm (55.7 in.)
- with mower - 48A: 1588 mm (62.5 in. ) / 54 HC: 1638 mm (64.5 in. ) / 60 HC: 1880 mm (74 in.) | with mower (deflector raised for storage) - 48A: 1362 mm (53.6 in. ) / 54 HC: 1461 mm (57.5 in.) / 60 HC: 1575 mm (62 in.) | without mower: 1219 mm (48 in.)
- tank: 19.7 L (5.2 U.S. gal.)
- Maximum: 544 kg (1,200 lb)
- bracket - front - holds up to four Quik-Tatch weights: 19 kg (42 lb) | 468 kg (1,032 lb)
- Transaxle type: K90 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor (48A) / Drive-over deck (54, 60 HC) | Front draft arms: Overcenter | Rear draft arms: V-align
- system type: Two-function hydraulic
- change: No tools | filter: Replaceable suction side 10 micron
- Front axle: JDM BA8 nodular iron casting | Spindle bushings: Metal, replaceable | Hood: Noryl GTX902, painted | Mower deck: Forged steel deck shell
- Fender: Stamped steel
- Two-piece adjustable seat with brand embroidery | suspension: Six-position parallel arm
- Fore-aft: While seated, slide rail | Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge
- 4 year/700 hour bumper-to-bumper
- 48
- Stamped
- $24,444.00
- Call for Availability
- New
- Pre-Order
- John Deere
- X700 Signature Series X758
- Diesel Engine
- 24 HP
- Diesel
- Available
- with mower - 48A: 1588 mm (62.5 in. ) / 54 HC: 1638 mm (64.5 in. ) / 60 HC: 1880 mm (74 in.) | with mower (deflector raised for storage) - 48A: 1362 mm (53.6 in. ) / 54 HC: 1461 mm (57.5 in.) / 60 HC: 1575 mm (62 in.) | without mower: 1219 mm (48 in.)
- Mower cut: 2.5-13.3 cm (1-5.25 in.) | Cut increments: 0.64 cm (0.25 in.) | 1384 mm (54.5 in.)
- 48
- Stamped